Digital LCR Meter Benchtop Tester for Capacitance Resistance Inductance Measuring 100Hz-10kHz (MCR5010)


Digital LCR Meter Benchtop Tester for Capacitance Resistance Inductance Measuring 100Hz-10kHz (MCR5010)




Features
  • Test frequency: 100Hz,120Hz,1KHz, 10KHz
  • 30Ω , 100Ω two types of different signal source output resistance
  • Basic measurment accuracy: 0.15%, built - in comparator
  • U disk copy screen function, test data saving function, support FAT16 format, FAT32 file system,standard with RS232C
  • Test Parameter:L,C, R, lZl, D, Q , X , ESR , θ(Deg),θ(Rad)
  • Digital LCR Meter Benchtop Tester for Capacitance Resistance Inductance Measuring 40Hz-200kHz (MCR5200)





    Features
  • Test frequency: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz , 10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.65kHz, 75kHz, 100kHz,120kHz, 150kHz, 200kHz, in total of 41 frequency points
  • 30Ω , 100Ω two types of different signal source output resistance
  • Basic measurment accuracy: 0.1%, built - in comparator
  • U disk copy screen function, test data saving function, support FAT16 format, FAT32 file system,standard with RS232C, HANDLER
  • Test Parameter:L,C, R, lZl, D, Q , X , ESR , θ(Deg),θ(Rad)
  • Digital Bridge Tester,Digital LCR Meter Benchtop Tester for Capacitance Resistance Inductance Measuring Matrix(US)





    Features
  • You Can Use Usb And Rs232 For Remote Control, And You Can Use A Handle To Classify Components.It Supports Automatic Identification Of Component Measurement, Is Equipped With Open Circuit And Short Circuit Correction, And Provides A Variety Of Test Interfaces.
  • Et44 Series Desktop Bridge Uses 3.5In Tft Display Screen, 5-Bit Half Display, Clear Interface Display, Easy To Use.Configuration Of Manual And Automatic Range, With Data Recording Function, Can Display The Maximum, Minimum And Average Value.
  • It Can Not Only Adjust The Output Frequency And Test Level, But Also Record The Value Of Components In The Measurement Process.
  • The Internal Bias Voltage Outputs 1Mv1500Mv, With A Basic Accuracy Of 0.2%.Supports Scpi Communication Protocol, Provides System Settings, Can Configure Language, Buzzer, Screen Brightness And So On According To User Needs.
  • The Measurement Frequency Is As High As 100 Khz And The Test Level Is 100-2000 Mv. It Supports The Measurement Of Current, Resistance And Electrolytic Capacitance.
  • Digital LCR Meter Benchtop Tester for Capacitance Resistance Inductance Measuring 100Hz-10kHz (MCR5010)





    Features
  • Test frequency: 100Hz,120Hz,1KHz, 10KHz
  • 30Ω , 100Ω two types of different signal source output resistance
  • Basic measurment accuracy: 0.15%, built - in comparator
  • U disk copy screen function, test data saving function, support FAT16 format, FAT32 file system,standard with RS232C
  • Test Parameter:L,C, R, lZl, D, Q , X , ESR , θ(Deg),θ(Rad)
  • XUXUWA Resistance Tester, Benchtop Digital LCR Meter ET4401Desktop LCR Bridge with USB and RS-232, Adjustable Measuring Frequency 100hz~10KHZ Resistance Meter Capacitance Meters





    Features
  • Measuring frequency up to 10KHZ.
  • Test level 10 ~ 2000 mv, 1 mv step continuously adjustable.
  • Support dc resistance (DCR), electrolytic capacitor measurement.
  • The internal bias voltage output 10 mv ~ 1500 mv. Data record function (maximum, minimum, average).
  • Welcome to patrons, please rest assured to choose products. If you have any questions, please contact us in time via email, we will answer you within 24 hours.
  • Digital LCR Meter Benchtop Tester 100kHz for Capacitance Resistance Inductance 0.05% Accuracy with ALC, RS232, HANDLER (MCR-6100A)





    Features
  • 12Hz-100kHz continuously adjustable,0.05% basic testing accuracy, high speed in measurment.
  • 30Ω,50Ω,100Ω,10/CC four different signal output impedance
  • Automatic level control function
  • Standard with RS232C, USB HOST, USB DEVICE, HANDLER
  • Test Parameter:︱Z︱,︱Y︱, C, L , X , B , R , G , D , Q , θ , DCR
  • AT8611 Professional Digital DC Electronic Load Tester Digital LCR Meter Benchtop Tester for Capacitance Resistance 150W 150V 30A(110V US Plug)





    Features
  • High Accuracy :AT8611 DC electronic load tester, with high Accuracy and stability, can adapt to the occasion of high current discharge.
  • Performance :Controlled by high performance ARM microprocessor, it has excellent measurement speed and performance.
  • Auxiliary Accessories :With 3.5in LCD display, support Chinese and English display, data measurement results can be visually displayed.
  • What You Get :Four operating modes are provided, constant current (CC), constant voltage (CV), constant power (CP) and constant resistance (CR).
  • Composition :Provides seven test functions: Normal Test Function (NRM), LED Load Test Function, Dynamic Test Function (TRN), Sequential List Test (SEQ), Automatic List Test (ATF), Battery Test Function (BAT) and Short Circuit Test Function (SHT).
  • Digital LCR Meter Benchtop Tester for Capacitance Resistance Inductance 100Hz 120Hz 1kHz 10kHz





    Features
  • ★●LCD Display
  • ★●Correction: OPEN and SHORT
  • ★●Comparator Function: P1,P2,P3,NG,AUX
  • ★●Beep Alarm
  • ★●1000V DC Super-impact protection
  • CHUNSHENN Portable Tester, Digital Benchtop LCR Meter ET4502 Desktop LCR Bridge with USB and RS-232, Adjustable Measuring Frequency 10hz~20KHZ Resistance Meter Impedance Analyzers Capacitance Meters I





    Features
  • Measurement frequency up to 20KHZ, 1hz step continuously adjustable.
  • Test level 100 ~ 2000mV.
  • Support the measurement of DC resistance and electrolytic capacitor.
  • Internal bias voltage output (1mV-1500mV). Automatic identification of component measurement.
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.
  • CHUNSHENN Portable Tester, Benchtop Digital LCR Meter ET4401Desktop LCR Bridge with USB and RS-232, Adjustable Measuring Frequency 100hz~10KHZ Resistance Meter Capacitance Meters





    Features
  • Measuring frequency up to 10KHZ.
  • Test level 10 ~ 2000 mv, 1 mv step continuously adjustable.
  • Support dc resistance (DCR), electrolytic capacitor measurement.
  • The internal bias voltage output 10 mv ~ 1500 mv. Data record function (maximum, minimum, average).
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.